DTV2000DS LINUX DRIVER

I’ve also experimented with inputlirc but this didn’t resolve my problem. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn’t intend. To use the previous version replace the “wget” line in step 5 with:. All is described here:. Retrieved from ” https: If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum. If you have a quick look inside the file just out of interest , you will notice that how this bug was messing up all the tuner frequency calculations.

Uploader: Mikall
Date Added: 9 October 2015
File Size: 48.27 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22449
Price: Free* [*Free Regsitration Required]

The frequencies are given in Table 41 in the stv2000ds http: The second tuner has been fine for 4 weeks now without a single reboot. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn’t intend. Here I am referring to a specific tag of the repository, i. This fix is from discussions here http: I Gregoryo have had no success with the remote, but there is hope from linhx.

Digital Tuner Cards

Similar problem is described here for a Haupage card: After a while it would lose that tuner and the only way to get it to work again was to cold boot.

  DFG/1394-1E MAC DRIVER DOWNLOAD

To do a true cold boot to replicate the act of pulling out a USB device make sure the mains power cord is removed – some PSUs have a rocker dtv2000dz that will do the same job – and wait linu seconds for the 5V bus to shut down completely before reapplying power.

Until then we all have to sweat it a bit!! It is currently not supported out of the box, though it can be made to work in some circumstances. Dgv2000ds, I spent two weeks trying to get the remote control Y04G to work with the new kernel 2.

Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a bigger power supply from another machine. This is based on the following commit: You should have the card operating correctly now. Retrieved from ” https: This page was last modified on 6 Februaryat Am I missing a kernel driver module?

Leadtek WinFast DTVDS – LinuxTVWiki

The rest of the process is still the same. The previous firmware version is more stable. Still only 1 tuner working. Second tuner only works on rare occassions. Power cycling by using the power button isn’t enough in some cases to bring the malfunctioning DS to linkx true cold boot state.

  FLATBED SCANNER BEARPAW 1200 DRIVER

This was the only way I could get a pair of recently unresponsive DS cards to start working again – the ATX power button cycling wasn’t enough. Please leave comments in the discussion session or put comments in http: Then shut down your computer important if you’ve been trying to load this card already, as the correct firmware will be loaded and turn it on again This is based on debian flavours.

Disabling the power management on the USB bus fixed this problem.

V4L/DVB: af9015: support for Leadtek WinFast DTV2000DS [Linux 2.6.34]

Two channel tuning on this card at least now works out of the box on kernel 2. I get no indication of any signal coming from the remote. However there is a patch missing which enables support: Libux use the previous version replace the “wget” line in step 5 with:.

I have tried using evtest, mode2, and irw to no avail. I expect this means the card is supported out of the box on Views Read View source View history. Playing around with the delay and repeat settings didn’t make any difference.